Conference Papers

CONFERENCE PAPERS

1. Ho, C.M. and Kovasznay, L.S.G., “Acoustic Wave Propagation through a Two-Dimensional Turbulent Jet”, Proceedings of First Interagency Symposium on University Research in Transportation Noise, Vol. I, pp. 3-17, 1973.

2. Ho, C.M. and Kovasznay, L.S.G., “Shock Wave Propagation Through a Turbulent Pipe Flow”, Proceedings of Second Interagency Symposium on University Research in Transportation Noise, Vol. II, pp. 756-767, 1974.

3. Nosseir, N.S.M. and Ho, C.M., “Pressure Fields Generated by Instability Waves and Coherent Structures in an Impinging Jet”, AIAA Paper No. 80-0980, 1980.

4. Ho, C.M. and Chen, Shin-Hsing, “Unsteady Wake of a Plunging Airfoil”, AIAA Paper No. 80-1446, 1980.

5. Gutmark, E. and Ho, C.M., “On a Forced Elliptic Jet”, Proceedings of International Symposium on Turbulent Shear Flows, 1983.

6. Ho, C.M., “Genesis of Unsteady Separation”, Proceedings of Symposium on Unsteady Separated Flow, pp. 165-168, 1983.

7. Gad-el-Hak, M, Ho, C.M., and Blackwelder, R.F., “A Visual Study of a Delta Wing in Steady and Unsteady Motion”, Proceedings of Symposium on Unsteady Separated Flow, pp. 45-51, 1983.

8. Ho, C.M. and Zhang, Y.Q., “On the Manipulation of Spreading Rates of Forced Mixing Layers”, Turbulence Shear Flow Conference, 1983.

9. Ho, C.M. and Lafouasse, B., “Hydrodynamic Pressure Field of an Axisymmetric Jet”, AIAA Paper No. 84-2316, Williamsburg, Virginia, October 15-17, 1984.

10. Masselin, M. and Ho, C.M., “Lock-on and Instability in a Flat Plate Wake”, AIAA Paper No.85-0571, 1985.

11. Gad-el-Hak, M. and Ho, C.M., “Three-Dimensional Effects on a Pitching Lifting Surface”, AIAA Paper No. 85-0041, 1985.

12. Ho, C.M., “Mixing Processes in Free Shear Layers”, Invited Paper, AIAA Paper No. 86-0234, 1986.

13. Ho, C.M. and Hsiao, F. B., “Interactions between Large Structures and Small Eddies in a Plane Jet”, IUTAM Symposium on Fluid Mechanics in the Spirit of G. I. Taylor, 1986.

14. Chan, A., Lafouasse, B. and Ho, C.M., “Modal Distributions of a Pressure Field Generated by a Circular Jet”, AIAA Paper No. 86-1910, 1986.

15. Gad-el-Hak and Ho, C.M., “Aerodynamics of a Missile in Unsteady Flight”, AIAA Paper No. 86-0572, 1986.

16. Shih, C. and Lee, M. and Ho, C.M., “Control of Separated Flow on a Symmetric Airfoil”, Control of Turbulent Flows, Bangalore, India, January 1987.

17. Lee, M., Shih, C. and Ho, C.M., “Leading Edge Separation over a Delta Wing”, Proceedings of ASME Fluids Engineering Spring Conference, 1987.

18. Lee, M, Shih, C. and Ho, C.M., “Response of a Delta Wing in Steady and Unsteady Flow”, Proceedings of Unsteady Aerodynamics, 1987.

19. Koshigoe, S., Ho, C.M., and Tubis, A., “Application of a Generalized Shooting Method to the Linear Instability Analysis of Elliptic Core Jets”, AIAA paper No. 87-2733, 1987.

20. Ho, C.M., Lee, M. and Shih, C., “Unsteady Separation over Two and Three Dimensional Airfoils”, Proceedings of Unsteady Aerodynamics, 1987.

21. Hertzberg, J. and Ho, C.M., “Vortex Dynamics in an Isothermal Rectangular Dump Combustor”, Proceedings of Twenty-seventh International Symposium on Combustion, Seattle, Washington, 1988.

22. Jou, W. H., Knoke, G. S., and Ho, C.M., “Entrainment Enhancement of a Supersonic Jet for Advanced Ejectors”, Proceedings of DOE Ejector Technology Conference, 1988.

23. Austin, T., Hertzberg, J. and Ho. C.M., “Entrainment of 3-D Shear Layer”, Proceedings of the Fourth Asian Congress of Fluid Mechanics, pp. A214-216, 1989.

24. Wat, J. and Ho, C.M., “Dynamic Loading on Impact Surfaces of a High Subsonic Elliptic Jet”, AIAA paper No. 89-1139, 1989.

25. Hertzberg, J. and Ho, C.M., “Behavior of Confined Shear Layers in a Rectangular Sudden Expansion”, Proceedings of the Third International Conference of Fluid Mechanics, Cairo, Egypt, 1990.

26. Schreck, S. and Ho, C.M., “Coherent Structure Induced Pressure Fluctuations in an Elliptic Jet”, AIAA Paper No. 90-3963, 1990.

27. Ho, C.M., Knoke, G.S., Geller, E.W., Liu, H.T., Jou, W.H., Murphy, R.W., and Chen, F.C., “Study of Asymmetric Supersonic Jet Flow for Ejectors”, Thermo-Physical Aspects of Energy Conversion – The Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, AES – Vol. 16, pp. 55-66, November 25-30, 1990.

28. Gursul, I. and Lin, H. and Ho, C.M., “Vorticity Dynamics of 2-D and 3-D Wings in Unsteady Free Stream”, AIAA paper no. 91-0011, Reno, Nevada, January 7-10, 1991.

29. Hertzberg, J.R. and Ho, C.M., “Time Averaged 3d Flow in a Rectangular Sudden Expansion”, AIAA Paper No. 91-0040, 1991.

30. Austin, T. and Ho, C.M., “Controlled Entrainment in a 2:1 Aspect-Ratio Subsonic Elliptic Nozzle”, AIAA Paper No. 92-0537, 1992.

31. Schreck, S., Ho, C.M., and Sarminento, R. S., “Noise Radiated from Axisymmetric and Asymmetric Jets”, AIAA Paper No. 92-02-044, Aachen, Germany, May 11-14, 1992.

32. Leu, T.S. and Ho, C. M., “Control of Wakes by Manipulating Mean Velocity Distributions”, 30th ASME Fluids Engineering Conference, Los Angeles, CA, June 1992.

33. Gursul, I. and Ho, C.M., “Vortex Breakdown over Delta Wings in Unsteady Free Stream”, AIAA Paper No. 93-0555, Reno, Nevada, January 11-14, 1993.

34. Leu, T.S. and Ho, C.M., “Control of a 2-D Wake by Suction at the Trailing Edge of a Splitter Plate”, Proceedings of the 9th Symposium on Turbulent Shear Flows, Kyoto, Japan, 1993.

35. Leu, T.S. and Ho, C.M., “Free shear Layer Control and Its Application to the Fan Noise”, AIAA Paper No. 93-3242, 1993.

36. Liu, J., Tai, Y.C., Pong, K. and Ho, C.M., “Micromachined Channel/Pressure Sensor Systems for Micro Flow Studies,” 1993 International Conference on Solid State Sensors and Actuators, pp. 995-997, June 1993.

37. Liu, J.Q., Tai, Y.C., Lee, J., Pong, K. Y. Zohar and Ho, C.M. “In-Situ Monitoring and Universal Modeling of Sacrificial PSG Etching Using Hydrofluoric Acid,” Proceedings, IEEE Micro Electro Mechanical Systems Workshop (MEMS ’93), Fort Lauderdale, FL, pp. 71-76, February 7-10,1993.

38. Ho, C. M., “Interaction between Fluid Dynamics and New Technology”, Keynote Talk, Proceedings of the First International Conference on Flow Interaction, pp. 1-8, September 5-9, 1994.

39. Ho, C.M. and Tai, Y.C., “MEMS: Science and Technology,” Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 39-50, ASME, 1994.

40. Pong, K.C., Ho, C.M., Liu, J. and Tai, Y.C., “Nonlinear Pressure Distribution in Uniform Microchannels,” Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 51-56, ASME, 1994.

41. Liu, C., Tai, Y.C. Huang, J. and Ho, C. M., “Surface-Micromachined Thermal Shear Stress Sensor,” Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 9-16, ASME, 1994.

42. Tsao, T., Liu, C., Tai, Y.C. and Ho, C. M., “Micromachined Magnetic Actuator for Active Fluid Control,” Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 31-38, ASME, 1994.

43. Ho, C.M., Miu, D., and Tai, Y.C., “Control of Macro Aerodynamic Device by Micro- Actuators,” Proceedings, GOMAC Conference, San Diego, CA, pp. 211-214, Nov. 1994.

44. Jiang, F., Tai, Y.C., Ho, C.M., Karan, R. and Garstenauer, M., “Theoretical and Experimental Studies of Micromachined Hot-Wire Anemometers,” Technical Digest, International Electron Device Meeting (IEDM ’94), San Francisco, CA, pp. 139-142, Dec. 1994.

45. Jiang, F., Tai, Y.C., Ho, C.M. and Li, W., “A Micromachined Polysilicon Hot-Wire Anemometer,” Technical Digest, Solid-State Sensor and Actuator Workshop, Hilton Head Island, South Carolina, pp. 264-267, June 1994.

46. Liu, C., Tsao, T., Tai, Y.C., Ho, C.M., “Surface Micromachined Magnetic Actuators,” Proceedings, IEEE Micro Electro Mechanical Systems, Oiso, Japan, pp. 57-62, Jan. 25-28, 1994.

47. Miller, R.A., Burr, G.W., Tai,C.H., Psaltis, D., Ho, C.M., and Katti, R.R., “Electromagnetic MEMS Scanning Mirrors for Holographic Data Storage”, Proceedings, The Electrochemistry Society Meeting (ECSM ’95), Vol. 95-18, pp. 474-480. October 1995

48. Liu, C., Tsao, T., Tai, Y.C., Liu, W., Will P. and Ho. C.M., “A Micromachined Permalloy Magnetic Actuator Array for Micro Robotics Assembly Systems,” Technical Digest, 1995 International Conference on Solid State Sensors and Actuators (Transducers ’95), pp. 328-331,1995.

49. Shih, J.C., Ho, C.M., Liu, J. and Tai, Y.C., “Non-Linear Pressure Distribution in Uniform Microchannels”, ASME AMD-MD, 1995.

50. Tung, S., Hong, W., Ho, C.M. Liu C. and Tai, Y.C., “Control Of Streamwise Vortices in 2-D Channel Flow,” Proceedings, The 6th Congress of Asian Fluid Mechanics, Singapore, May, 1995.

51. Huang, J., Ho, C.M., Tung, S., Liu C., and Tai, Y.C., “Micro Thermal Shear Stress Sensor With and Without Cavity Underneath,” Proceedings, IEEE Instrumentation and Measurement Technology Conference, Waltham, MA, pp. 171-174, April, 1995.

52. Tai, Y.C. and Ho, C.M., “Silicon Micromachining and its Application”, Proceedings of SPIE, Vol. 2448, pp. 141-151, 1995.

53. Huang, J.B. and Ho, C.M., “Micro Riblets for Drag Reduction”, Proceedings of SPIE, Vol. 2448, pp. 245-250, 1995.

54. Liu, C., Tsao, T., Tai, Y.C., Leu, J., Ho, C.M., Tang, W.L. and Miu, D., “Out-Of-Plane Permalloy Magnetic Actuators for Delta Wing Control,” Proceedings, IEEE Micro Electro Mechanical Systems, pp. 7-12, 1995.

55. Liu, J., Tai, Y.C. Pong, K. and Ho, C.M., “MEMS for Pressure Distribution Studies of Gaseous Flows in Microchannels,” Proceedings, IEEE Micro Electro Mechanical Systems (MEMS’95), Amsterdam, The Netherlands, pp. 209-215, 1995.

56. Ho, C.M., “The Opportunities of Using Micromachine Based Transducers for Flow Control”, Proceedings of The 6th Asian Congress of Fluid Mechanics, Singapore, May 22-26, 1995.

57. Ho, C.M., “Control of Wall-bounded Flow Using MEMS Based Transducers”, Proceedings of Advances in Turbulence Research -1995, Postech, Pohang, Korea, pp. 177-184, March 27-29, 1995.

58. Ho, C.M., “Control of Streamwise Vortices in 2-D Channel Flow”, Proceedings of the 10th Turbulent Shear Flows, University Park, Pennsylvania, August 14-16, 1995.

59. Jiang, F., Tai, Y.C., Huang J.B., and Ho, C.M., “Polysilicon Structures for Shear Stress Sensors,” Proceedings, IEEE Region 10 International Conference on Microelectronics and VLSI, Hong Kong, pp. 12-15, Nov. 1995.

60. Huang, J.B., Liu, C., Jiang, F., Tung, S., Tai, Y.C. and Ho, C.M., “Fluidic Shear-Stress Measurement Using Surface Micromachined Sensors” Proceedings, IEEE Region 10 International Conference on Microelectronics and VLSI, Hong Kong, pp. 16-19, Nov. 1995.

61. Mischler, M., Tseng, F., Ulmanella, U., Ho, C.M., Jiang F. and Tai, Y.C., “A Micro Silicon Hot-Wire Anemometer” Proceedings, IEEE Region 10 International Conference on Microelectronics and VLSI, pp. 20-23, Hong Kong, November, 1995.

62. Jiang, F., Tai, Y.C., Gupta, B., Goodman, R., Tung, S., Huang J. and Ho, C. M., “A Surface-Micromachined Shear-stress Imager,” Proceedings, IEEE Micro Electro Mechanical Systems Meeting, San Diego, California, pp. 110-115, Feb. 1996.
63. Miller R., Burr, G., Tai, Y.C., Psaltis, D., Ho, C.M. and Katti, R, “Electromagnetic MEMS Scanning Mirrors for Holographic Data Storage,” Technical Digest, Solid-State Sensor and Actuator Workshop, pp.183-186, 1996.

64. Ho, C.M., Tong S. and Tai,, Y.C., “MEMS – An Innovative Approach to Transport Phenomena”, Proceedings of 9th International Symposium on Transport Phenomena, Singapore, June, 25-28, 1996.

65. Ho, C.M., “Flow Control by a Distributed Micro System”, Proceeding of Flow Control Conference, Corsica, France, July 1-5, 1996.

66. Ho, C.M., Tong S. and Tai, Y.C., “Interactive Control of Wall Structures by MEMS Based Transducers”, Proceedings of Sixth European Turbulence Conference, Lausanne, Switzerland, July 2-5, 1996.

67. Ho, C.M., “Flow Measurement and Control by MEMS”, Flow Modeling and Turbulence Measurements, ed. Chen, C.J., Shih, C., Lienau, J. and Kung, R.J., pp. 11-16, 1996.

68. Ho, C.M., “Control of Fluid Flows by Micro Transducers”, Proceedings of 7th International Symposium on Micromachine and Human Science, Osaka, Japan, October 2-4, 1996.

69. Tseng, F.G., Linder, C., Ulmanella, U., Kim, C.J. and Ho, C.M., “Control of Mixing with Micro-injector for Combustion Applications”, ASME MEMS, DSC-Vol. 59, pp 183- 187, 1996.

70. Shih, J.C., Ho, C.M., Liu, J. and Tai, Y.C., “Monatomic and Polyatomic Gas Flow through Uniform Microchannels”, ASME MEMS, DSC-Vol. 59, pp 197- 203, 1996.

71. Lee, G.B., Ho, C.M., Jiang, F. Liu, C., Tsao, T., Tai, Y.C., and Schsuer, F., “Control of Roll Moment by MEMS”, ASME MEMS, ed. Ng. W., 1996.

72. Gupta, B., Goodman, R., Jiang, F., Tai, Y.C., Tung, S., Ho, C., “Analog VLSI For Active Drag Reduction”, IEEE Micro, Vol. 16, No. 5, pp 53-59, October 1996.

73. Gupta, B., Goodman, R., Jiang, F., Tsao, T., Tai, Y.C., Tung, S., Ho, C., “Wafer Scale MEMS and Analog VLSI System For Active Drag Reduction”, Proceedings of the 8th IEEE International Conference on Innovative Systems in Silicon, Austin, TX, pp. 46-52, October 1996.

74. Gupta, B., Goodman, R., Jiang, F., Tai, Y.C., Tung, S., Ho, C., “Analog VLSI For Active Drag Reduction,” Proceedings of the 5th Annual IEEE Conference on VLSI for Neural Networks, Lausanne, Switzerland, pp. 45-51, February 12-14, 1996.

75. G. B. Lee, C. M. Ho, F. Jiang, C. Liu, T. Tsao, and Y. C. Tai, “Distributed Flow Control by MEMS”, ASME 1996 International Mechanical Engineering Congress & Exposition, Atlanta, Georgia, USA, November 17-22, 1996.

76. Jiang, F., Tai, Y.C., Walsh, K., Tsao, T., Lee, G.B., Ho, C.M., “A Flexible MEMS Technology and Its First Application to Shear Stress Sensor Skin”, Proceedings, 1997 IEEE Micro Electro Mechanical Systems Workshop (MEM ’97), Nagoya, Japan, pp. 465-470, January 26-30, 1997.

77. Yang, X, Grosjean, C., Tai, Y.C., and Ho, C.M., “ A MEMS Thermopneumatic Silicon Membrane Valve”, Proceedings, 1997 IEEE Micro Electro Mechanical Systems Workshop (MEMS ’97), Nagoya, Japan, pp. 114-118, January 26-30, 1997.

78. Tai, Y.C. and Ho, C.M., “MEMS Devices For Flow Control”, AIAA Paper 97-1787, Snowmass, Colorado, June 29 – July 2, 1997.

79. Kimura, M., Tung, S., and Ho, C.M., Jiang, F., and Tai, Y.C., “MEMS for Aerodynamic Control”, AIAA paper 97-2118, 1997.

80. Li, W.J. and Ho, C.H., “MEMS on Contour Substrates”, The 9th International Conference on Solid-State Sensors and Actuators (Transducers ‘97), pp. 1-2, Chicago, June 16-19, 1997.

81. Li, W.J. and Ho, C.H., “MEMS on Bulk Mechanical Contour Substrates”, The 9th International Conference on Solid-State Sensors and Actuators (Transducers ‘97), pp. 1431-1434, Chicago, June 16-19, 1997.

82. D. Wang, H. Alexander, Q. Chen, G. P. Carman, C.J. Kim, and C.M. Ho, “Piezoelectrically Driven Meso-Scale Actuator Device for Aerodynamic Control”, Proc. 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit and AIAA/ASME/AHS Adaptive Structures Forum, Kissimmee, FL, pp. 1738-1746, April 1997.

83. Yang, X., Tai, Y.C., and Ho, C.M., “Micro Bellow Actuators,” Technical Digest, 1997 International Conference on Solid-State Sensors and Actuators (Transducers ‘97), Chicago, IL, Vol. 1, pp. 45-48, June 16-19, 1997.

84. Motoaki, K., Tung, S., Hoffelner, J., and Ho, C.M., “Turbulent Surface Shear Stress Measurement by Micro Sensor Arrays”, The 2nd International Conference on Flow Interaction, Berlin, Germany, July 21-25, 1997.

85. Tsao, T., Jiang, F., Miller, R.A., Tai, Y.C., Gupta, B., Goodman, R., Tung, S., and Ho, C.M., “An Integrated MEMS System for Turbulent Boundary Layer Control,” Technical Digest, 1997 International Conference on Solid-State Sensors and Actuators (Transducers ‘97), Vol. 1, pp. 315-318, 1997.

86. G. B. Lee, C. M. Ho, F. Jiang, T. Tsao and Y. C. Tai, “Control of an Aircraft by M3 Systems”, Bulletin of the American Physical Society, 50th Annual Meeting of the Division of Fluid Dynamics, San Francisco, CA, November 23-25, 1997.

87. G. B. Lee, G. Jiang, T. Tsao, Y. C. Tai and C. M. Ho, “Macro Aerodynamic Devices Controlled by Micro Systems”, 1997 IEEE Aerospace Conference, Snowmass, Colorado, Vol. 3, pp. 255-263, February 1-8, 1997.
88. C. M. Ho, S. Tung, and G. B. Lee, “MEMS – A Technology for Advancements in Aerospace Engineering”, AIAA 35th Aerospace Sciences Meeting & Exhibit, AIAA 97-0545, Reno, Nevada, January 6-10, 1997.

89. W. J. Li, J. D. Mai, and C. H. Ho, “A MEMS Fabrication Technique for Non-Planar Substrates”, IEEE MEMS ‘98, Heidelberg, Germany, pp. 268-273, 1998.

90. W. J. Li, J. C. Shih, C. M. Ho, J. Q. Liu, and Y. C. Tai, “Numerical Simulation for the Sacrificial Release of MEMS Square Diaphragms”, First International Conference on MSMSSA, San Jose, CA, April 1998.

91. C. Grosjean, G. Lee, W. Hong, Y. C. Tai and C. M. Ho, “Micro Balloon Actuators For Aerodynamic Control”, 1998 The Eleventh Annual International Workshop on Micro Electro Mechanical Systems (MEMS ’98), Heidelberg, Germany, pp. 166-171, January 25-29, 1998.

92. Ho, C.M., Huang, P.H., Yang, J.M., Lee, G.W. and Tai, Y.C., “Active Flow Control by Micro Systems”, Proceedings of IUTAM Conference of Flow Control, Gottingen, Germany, 1998.

93. Ho, C.M., Huang, P.H., Lew, James, J. Mai, Lee, G.W. and Tai, Y.C., “MEMS: An Intelligent System Capable of Sensing-Computing-Actuating” Proceedings of 4th International Conference on Intelligent Materials, pp. 300-303, 1998.

94. W. Sun, T.T. Tsang, W. J. Li, J. Mai, and C.M. Ho, “Design and Analysis of a Foundry Fabricated Surface Micromachined Rotation Sensor”, IEEE/ASME/IEE 5th International Conference on Mechatronics and Machine Vision in Practice, Nanjing, China, pp. 191-196, September 1998.

95. F. G. Tseng, C. J. Kim, and C. H. Ho, “A Microinjector Free of Satellite Drops and Characterization of the Ejected Droplets”, ASME Int. Mechanical Engineering Congress and Exposition, Anaheim, CA, pp. 89-95, November 1998.

96. F. G. Tseng, C. S. Shih, C. J. Kim, and C. M. Ho, “Characterization of Droplet Injection Process of a Microinjector”, Book of Abstracts, 13th U.S. National Congress of Applied Mechanics, Gainsville, Fl, TB3 (unpaged volume), June 21-26, 1998.

97. F. G. Tseng, C. J. Kim and C. M. Ho, “A Novel Microinjector with Virtual Chamber Neck”, IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, pp. 57-62, January 1998.

98. F. Sherman, C. J. Kim, J. Woo, and C. M. Ho, “In-Plane Microactuactor for Fluid Control Application”, IEEE Micro Electro Mechanical Systems Workshop, Heidelberg, Germany, pp. 454-459, January 1998.

99. X. Yang, J. M. Yang, X. Q. Wang, E. Meng, Y.C. Tai and C. M. Ho, “ Micromachined Membrane Particle Filter”, 1998 The Eleventh Annual International Workshop on Micro Electro Mechanical Systems (MEMS ’98), Heidelberg, Germany, pp. 137-142, January 25-28, 1998.
100. S. Wu, J. D. Mai, Y. Zohar, Y.C. Ho, “A Suspended Micromachined with Integrated Temperature Sensors for High-Pressure Flow Studies”, 1998 The Eleventh Annual International Workshop on Micro Electro Mechanical Systems (MEMS ’98), Heidelberg, Germany, pp. 87-92, January 25-28, 1998.

101. G. B. Lee, C. Shih, C. M. Ho, “The Control of a Delta Wing by Micromachined Sensors and Actuators”, 13th U.S. Congress of Applied Mechanics, June 1998.

102. S. Wu, J. D. Mai, Y. C. Tai and C. M. Ho, “Micro Heat Exchanger by Using MEMS Impinging Jets”, Twelfth Annual International Workshop on Micro Electro Mechanical Systems (MEMS ’99), Florida, USA, pp. 171-176, January 17-21, 1999.

103. S. W. Lee, J. M. Yang, Y. C. Tai and C. M. Ho, “Electrostatically Active Microfilters for Automated Airborne Particle Collection”, 1999 International Conference on Solid-State Sensors and Actuators (Transducers ’99), Sendai, Japan, June 1999.

104. Kimura, M., Tung, S., Lew, J., and Ho, C.M., “ Shear Stress Imaging Micro chip for Detection of High shear Stress Regions”, Proceedings of the 3rd ASMS/JSME Joint Fluids Eng. Conference, San Francisco, CA, July 18-22, 1999.

105. J. M. Yang, X. Yang, C. M. Ho and Y. C. Tai, “Prediction of the Pressure Drop Through Micromachined Particle Filters”, Technical Proceedings of International Conference on Modeling and Simulation of Microsystems (MSM ’99), San Juan, Puerto Rico, pp. 546-549, April 1999.

106. J. M. Yang, X. Yang, S. W. Lee, A. Desai, C. M. Ho and Y. C. Tai, “Micromachined Airborne Particle Collection System”, International Business Communication’s (IBC) 4th Annual Conference on Microfabrication & Microfluidic Technologies, San Francisco, California, August 1999.

107. Lee, Y. K., Yi, U., Tseng, F. G., Kim, C. J. and Ho, C. M., “Fuel Injection by A Thermal Microinjector”, Symposia of Micro-Electro-Mechanical Systems, ASME IMECE, Nashville, Tennessee, November 14-19, 1999.

108. Huang, P.H., Ho, C.M., Jiang, F. and Tai, Y.C., “MEMS Transducers for Aerodynamics – A Paradym Shift”, AIAA Paper No. 00-0249, Reno, Nevada, January 10-13, 2000.

109. Pornsin-Sirirak, T.N., Lee, S.W., Nassef, H., Grasmeyer, J., Tai, Y.C., Ho, C.M., and Keennon, M., “MEMS Wing Technology for a Battery-Powered Ornithopter”, The 13th IEEE International Conference on Micro Electro Mechanical Systems (MEMS ’00), Miyazaki, Japan, pp. 709-804, January 23-27, 2000.

110. Jiang, F., Xu, Y., Weng, T., Han, Z., Tai, Y.C., Huang, A., Ho, C.M., and Newbern, S., “Flexible Shear Stress Sensor Skin for Aerodynamics Applications,” The 13th IEEE International Conference on Micro Electro Mechanical Systems (MEMS ’00), Miyazaki, Japan, pp. 364-369, January 23-27, 2000.

111. Gau, J.J. Lan, E. H. Dunn, B. Ho, C.M. “Enzyme-Based Electrochemical Biosensor with DNA Array Chip”, Proceedings of Micro Total Analysis System 2000, The Netherlands, pp. 509-511, May 14-18, 2000.

112. Takei, M., Kimura, M., Ho, C.H., Saito, Y., and Horii, K., “Visualization of Shear Stress with Micro Imaging Chip and Discrete Wavelets Transform”, Proceedings of ASME FEDSM’00, Boston, Massachusetts, June 11-15, 2000.

113. Kimura, M., Takei, M., Miyaki, N., Ho, C.H., Saito, Y., and Horii, K., “High Shear Stress Detection with Micro Imaging Chip and Discrete Wavelets Transform”, Proceedings of ASME FEDSM’00, Boston, Massachusetts, June 11-15, 2000.

114. Lin, Q., Jiang, X.Q., Han, Z., Tai, Y.C., Lew, J. and Ho, C.M., “MEMS Thermal Shear-Stress Sensors: Experiments, Theory and Modeling”, Technical Digest, Solid State Sensor and Actuator Workshop (SSAW ’00), pp. 304-307, Hilton Head Island, South Carolina, June 2000.

115. Lee, Y. K., Tabeling, P., Shih, C. and Ho, C. M., “Characterization of a MEMS-Fabricated Mixing Device”, Proceedings of MEMS, ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, pp.505-511, November 2000.

116. Chen, Y. F., Yang, J. M., Gau, J. J., Ho C.M. and Tai, Y. C., “Microfluidic Detection System for Biological Agent Detection”, The 3rd International Conference on The Interaction of Art and Fluid Mechanics, Zurich, Switzerland, 2000.

117. Wang, T.H, Chen, Y.F, Masset, S., Ho, C.M., and Tai, Y.C., “Molecular Beacon Based Micro Biological Detection System”, Proceedings of International Conference on Mathematics and Engineering Techniques in Medicine and Biological Sciences, 2000.

118. Pornsin-Sirirak, T.N., Tai, Y.C., Ho, C.M. and Keenon, M., “Microbat-A Palm-Sized Electrically Powered Ornithopter”, ISM2000 International Symposium on Smart Structures and Microsystems, Hong Kong, China, October 19-21, 2000.

119. Huang, P.H., Folk, C., Silva, C., Christensen, B., Chen, Y.F., Lee, G.B., Chen, Minjdar, Newbern, S., Jiang, F., Grosjean, C., Ho, C.M., and Tai, Y.C., “Applications of MEMS Devices to Delta Wing Aircraft: From Concept Development to Transonic Flight Test”, AIAA Paper No. 2001-0124, Reno, Nevada, January 8-11, 2001.

120. Folk, C. and Ho, C.M., “Micro-Actuators for Control of Delta Wing with Sharp Leading Edge”, AIAA Paper No. 2001-0121, Reno, Nevada, January 8-11, 2001.

121. Wang, T.H, Masset, S., and Ho, C.M., “A Zepto Mole DNA Micro Sensor”, IEEE Int. Conf. Micro Electro Mechanical Systems, Interlaken, Switzerland, pp. 431-434, January 2001.

122. Pornsin-Sirirak, T.N., Tai, Y.C., Nassef, H. and Ho, C.H., “Flexible Parylene Actuator For Micro Adaptive Flow Control”, IEEE Int. Conf. Micro Electro Mechanical Systems, Interlaken, Switzerland, pp. 511-514,January 2001.

123. Pornsin-Sirirak, T.N., Tai, Y.C., Ho, C.H. and Keenon, M., “Microbat-A Palm-Sized Electrically Powered Ornithopter”, 2001 NASA/JPL Workshop on Biomorphic Robotics, Pasadena, CA, August 14-17, 2001.

124. Lee, Y. K., Deval, J., Tabeling, P., and Ho, C. M., “Chaotic Mixing in Electrokinetically and Pressure Driven Micro Flows,” IEEE 14th International Conference on Micro Electro Mechanical System (MEMS ‘01), Interlaken, Switzerland, pp. 483-486, 2001.

125. Ho, C.M., “Fluidics – the Link between Micro and Nano Sciences and Technologies”, Technical Digest of the 14th IEEE International MEMS Conference (ISBN-0-7803-6251-9), Interlaken, Switzerland, pp. 375-384, 2001.

126. Liu, Z., Chu, W., Huang, P.H., Folk, C. and Ho, C.M., “Mining Sequence Patterns from Wind Tunnel Experimental Data for Flight Control”, Proceedings of the 5th Pacific-Asia Conference on Knowledge Discovery and Data Mining (PAKDD), Hong Kong, China, April 2001.

127. Huang, A., Folk, C., Ho, C. M., Liu, Z., Chu, W. W., Xu, Y., and Tai, Y. C., “Gryphon M3 System: Integration of MEMS for Flight Control”, Proceedings of SPIE, Vol. 4559, pp. 85-94, 2001.

128. Wang, T. H., Wong, P. K. and Ho, C. M., “Electrical Molecular Focusing For Laser Induced Fluorescence Based Single DNA Detection”, Technical Digest (ISBN-0-7803-7185-2), The 15th IEEE International Conference on MEMS (MEMS ‘02), Las Vegas, Nevada, pp. 15-18, 2002.

129. Deval, J., Tabeling, P., and Ho, C. M., “A Dielectrophoretic Chaotic Mixer”, Technical Digest (ISBN-0-7803-7187-9), The 15th IEEE International Conference on MEMS (MEMS ‘02), Las Vegas, Nevada, pp. 36-39, 2002.

130. Suzuki, H. and Ho, C. M., “A Magnetic Force Driven Chaotic Micro-Mixer” Technical Digest (ISBN-0-7803-7187-9), The 15th IEEE International Conference on MEMS (MEMS ‘02), Las Vegas, Nevada, pp. 40-43, 2002.

131. Pornsin-Sirirak, T.N., Liger, M., Tai, Y.C. and Ho, C.H., “Flexible Parylene-Valved Skin for Adaptive Flow Control”, Technical Digest (ISBN-0-7803-7185-2), The 15th IEEE International Conference on MEMS (MEMS ‘02), Las Vegas, Nevada, pp. 101-104, 2002.

132. Xu, Y., Tai, Y.C., Huang, P.H. and Ho, C.M., “IC-Integrated Flexible Shear-Stress Sensor Skin”, Technical Digest, Solid State Sensor and Actuator Workshop (SSAW ’02), Hilton Head Island, South Carolina, pp. 354-357,June 2002.

133. Liger, M., Pornsin-Sirirak, T.N., Tai, Y.C., Ho, S. and Ho, C.M., “Large-Area Electrostatically-Valved Skins for Adaptive Flow Control on Ornithopter Wings”, Technical Digest, Solid State Sensor and Actuator Workshop (SSAW ’02), Hilton Head Island, South Carolina, pp. 247-250, June 2002.

134. Wong, P.K., Wang, T.H. and Ho, C.M., “Optical Fiber Tip Fabricated By Surface Tension Controlled Etching”, Technical Digest, Solid State Sensor and Actuator Workshop (SSAW ’02), Hilton Head Island, South Carolina, pp. 94-97, June 2002.

135. Ho, S., Nassef, H., Pornsin-Sirirak, T.N., Tai, Y.C. and Ho, C.M., “Flight Dynamics of Small Vehicles”, 23rd Congress of the International Council for the Aeronautical Sciences (ICAS ‘02), Toronto, Canada, pp. 551.1-551.10, September 8-13, 2002.

136. Hsiai T., Wong P.K., Ing, M., Navab M., Reddy S., Demer L., Ho C. M., “Bio-MEMS Sensors for Real-Time Shear Stress on Endothelial Cell Dynamics”, Proceedings of the Second Joint Meeting of the IEEE Engineering in Medicine and Biology and the Biomedical Engineering Society, Houston, Texas, pp. 1828-1829, October 23-26, 2002.

137. Hsiai T, Ing, M. Navab, M., Reddy S., Ho, C. M., “Microsensors to Characterize Shear Stress Regulating Inflammatory Responses in the Arterial Bifurcations”, The Second Joint Meeting of the IEEE Engineering in Medicine and Biology and the Biomedical Engineering Society, Houston, Texas, pp. 662-663, October 23-26, 2002.

138. Wong, P.K., Chun, L.J. and Ho, C.M., “Multi-Color Single Filter Photobleaching Analysis for Measuring Gene Expression”, Proceedings of the Second Joint Meeting of the IEEE Engineering in Medicine and Biology and the Biomedical Engineering Society, Houston, Texas, pp. 629-630, October 23-26, 2002.

139. Wong, P.K., Kwong, C.H., Hsiai, T. and Ho, C.M., “Cell Tracking Velocimetry for Monocyte/Endothelial Cell Interactions”, The Second Joint Meeting of the IEEE Engineering in Medicine and Biology and the Biomedical Engineering Society, Houston, Texas, pp. 343-344, October 23-26, 2002.

140. Wong, P.K. and Ho, C.M., “Direct Manipulation of DNA Molecules using Hydrodynamic Force”, Nanoscale/Molecular Mechanics Conference, Hawaii, USA, May 12-17, 2002.

141. Ulmanella, U., Wong, P.K., Deval, J.H, Lan, E.H., Dunn, B. and Ho, C.M., “Flow Control and Particle Manipulation in Lab-on-a-chip”, Keynote Paper, The 1st International Meeting on Microsensors and Microsystems, L2, Taiwan, January 12-14, 2003.

142. Wong, P.K., Ulmanella, U. and Ho, C.M, “Fabrication of Microsurgical Tools for Single Cell Intracytoplasmic Injection”, IEEE MEMS 2003, Kyoto, Japan, pp. 359-362, January 19-23, 2003.

143. Folk, C., Ho, C.M., Chen, X. and Wudl, F., “Hydrogel Microvalves with Short Response Time”, 226th American Chemical Society National Meeting, New York, NY, September 7-11, 2003.

144. Suzuki, H., Kasagi, N. and Ho, C.M., “Chaotic Mixing of Magnetic Beads in Micro Cell Separator”, Proceedings, the 3rd International Symposium Turbulence and Shear Flow Phenomena, Sendai, Japan, pp. 817-822, June 24-27, 2003.

145. Suzuki, H., Nakano, M., Kasagi, N. and Ho, C.M., “Particle Tracking Velocimetry Measurement of Chaotic Mixing in a Micro Mixer”, Int. Symp. Micro-Mechanical Engineering (ISMME ‘03), Tsuchiura, Japan, December 2003.

146. Wong, P.K., Chen, C.Y., Wang, T.H. and Ho, C.M., “An AC Electroosmotic Processor for Biomolecules”, 12th International Conference on Solid-State Sensors and Actuators (Transducers ’03), Boston, MA, pp. 20-23, June 8‐12, 2003.

147. Huang, T.J., Flood, A., Chu, C.W., Kang, S., Guo, T.F., Yamamoto, T., Tseng, H.R., Yu, B.D., Yang, Y., Stoddart, J.F. and Ho, C.M., “In situ Infrared Spectroscopic Studies of Molecular Behavior in Nanoelectronic Devices”, IEEE-NANO 2003, San Francisco, CA, pp. 698-701, August 12-14, 2003.

148. Ulmanella, U., Cubaud, T., Wong, P.K., Wang, T.H., Yi-Kuen Lee, Y.K., Shih, C. and Ho, C.M., “Visualizing Heterogeneous Flows in Micro Fluidic Devices”, The 7th Asian Symposium on Visualization, KN-9, Singapore, November 3-7, 2003.

149. Folk, C., Ulmanella, U., Wong, P.K. and Ho, C.M., “Control of Micro/Nano Fluidics”, ISSMME 2003 International Symposium on Micro-Mechanical Engineering, Tsuchiura and Tsukuba, Japan, December 1-3, 2003.

150. Suzuki, H., Nakano, M., Kasagi, N. and Ho, C.M., “Particle Tracking Velocimetry Measurement of Chaotic Mixing in a Micro Mixer”, ISSMME 2003 International Symposium on Micro-Mechanical Engineering, Tsuchiura and Tsukuba, Japan, December 1-3, 2003.

151. Huang, P.H., Chen, P.J., Boland, J., Alberer, D., Wong, T.S., Yang, H.Q., Tai, Y.C. and Ho, C.M., “Liquid-Rotor Electret Power Generator Energized by a MEMS-based Pulsed Combustor”, Proceedings of Power MEMS’04, Kyoto, Japan, pp. 171-174, 2004.

152. Folk, C., Wong, P.K., Tan, W., Li, N., Ma, Y., Ho, C.M., “Micro/Nano Fluidics for Bio-Signature Detection”, XVII National and VI ISHMT/ASME Heat and Mass Transfer Conference, IGCAR, Kalpakkam, India, January 5-7, 2004.

153. Wong, P.K., Wong, W., Liao, J. and Ho, C.M., “A Cell-Based Assay for Rapid Chemical Screening”, microTAS ‘04, Sweden, 2004.

154. Cubaud, T., Ulmanella, U. and Ho, C.M., “Two-Phase Flow in Microchannels with Surface Modifications”, The 5th International Conference on Multiphase Flow (ICMF ’04), Yokohama, Japan, May 30-June 4, 2004.

155. Meng, D. S., Cubaud, T., Ho, C.M. and Kim, C.J., “A Membrane Breather for Micro Fuel Cells with High Concentration Methanol”, Hilton Head 2004: A Solid State Sensor, Actuator and Microsystems Workshop, South Carolina, June 6-10, 2004.

156. Garcia, D. and Ho, C.M., “Bio-Nano-Information Fusion”, AIAA Space and Exhibit, San Diego, CA, September 28-30, 2004.

157. Huang, T. J., Liu, Y., Brough, B., Flood, A.H., Bonvallet, P., Tseng, H.R., Baller, M., Magonov, S., Stoddart, J.F. and Ho, C.M., “A Nano-Chemo-Mechanical Actuator Based on Artificial Molecular Machines”, IEEE MEMS 2005, Miami, Florida, pp. 871-874, January 30-Febuary 3, 2005.

158. Wong, T.S., Huang, P.H. and Ho, C.M., “Towards High Density Silicone Polymeric Chemical Vapor Sensor Arrays for Electronic Nose Applications”, Proceedings, the 11th International Symposium on Olfaction and Electronic Nose 2005 (ISOEN ’05), Barcelona, Spain, pp. 398 – 401, 2005.

159. Wong, T.S., Huang, P.H. and Ho, C.M., “SU-8 Lift-off Patterned Silicone Chemical Vapor Sensor Arrays”, Proceedings, the 18th Annual IEEE International Conference on Micro-Electro-Mechanical Systems 2005 (MEMS ’05), Miami, Florida, pp. 754 – 757, 2005.

160. Huang, P.H., Wong, T.S. and Ho, C.M., “Conductive Silicone Based MEMS Sensor and Actuator”, Proceedings, the 13th International Conference on Solid-State Sensors, Actuators and Microsystems 2005 (Transducers ’05), Seoul, Korea, pp. 1406-1411, 2005.

161. Ho, C.M. and Wong, P.K., “Control Complex Biomolecular Systems”, IEEE Robio 2005, Hong Kong SAR and Macau SAR, June 29 – July 3, 2005.

162. Kwong, C.H., Li, N., and Ho, C.M., “Studies of deionization and impedance spectroscopy for blood analyzer”, Proc. Of SPIE, Vol. 6003, 2005.

163. Wong, I and Ho, C.M., “Self Assembled Monolayer Patterning Using Capillary Force Lithography”, IEEE Micro Electro Mechanical System (MEMS), Istanbul, Turkey, pp. 558-561, January 22 – 26, 2006.

164. Li, N., Wong, P.K., Lin, J. and Ho, C.M., “Single Cell Transfection Dynamics in a Microfluidic System,” The 10th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Tokyo, Japan, pp. 969 – 971, November 5 – 9, 2006.

165. Tsutsui, H., Wu, H. and Ho, C.M., “Stable Poly(Ethylene Glycol) Microwell Arrays for Long-Term Cell Patterning”, The 10th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Tokyo, Japan, pp. 242 – 244, November 5 – 9, 2006.

166. Kwong, C., Huang, P.H. and Ho, C.M., “A Microliter Electrokinetic Deionizer for Rapid Processing”, The 10th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Tokyo, Japan, pp. 368 – 370, November 5 – 9, 2006.

167. Benahmed, A. and Ho, C.M., “Using Surface Plasmon Band Gap for Biological and Chemical Sensing”, NSTI Nanotechnology, Boston, MA, May 7 -11, 2006.

168. Liao, J., Ma, Y., Gau, V., Mastali, M., Sun, C.P., Li, Y., McCabe, E., Landaw, E., Bruckner, D., Churchill, B., Haake, D., and Ho, C.M., “A Point-of-Care Micro-Laboratory for Direct Pathogen Indentification in Body Fluids”, The 1st IEEE NEMS, Zhuhai, China, January 18 – 21, 2006.
169. Benahmed, A. and Ho, C.M., “Using Surface Plasmon Band Gap for Biological and Chemical Sensing”, The 1st IEEE NEMS, Zhuhai, China, January 18 – 21, 2006.

170. Li, N., Kamei, D.T. and Ho, C.M., “On-Chip Continuous Blood Cell Subtype Separation by Deterministic Lateral Displacement”, The 2nd Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS ‘07), Bangkok, Thailand, January 16-19, 2007.

171. Ho, C.H., Ho, S., Wong, P.K., and Nassef, H., “Control Systems with Large Parameter Spaces”, IUTAM Symposium on Unsteady Separated Flows and Their Control, Kerkvra, Greece, June 18 – 22, 2007.

172. Wong, T.S., Brough, B., Christman, K.L., Kolodziej, C.M., Huang, P.H., Lam, R., Forbes, J.G., Wang, K., Maynard, H.D. and Ho, C.M., “Manufacture of Nanoscale Structures through Integrated Top-down and Bottom-up Approaches”, IEEE 7th International Conference on Nanotechnology (IEEE-Nano ‘07), Hong Kong SAR, pp. 126 – 130, August 2 – 5, 2007.

173. Wei, F., Zimmermann, B., Li, N., Ho, C.M. and Wong, D., “Electrochemical Detection of Salivary RNA,” IEEE 7th International Conference on Nanotechnology (IEEE-Nano ‘07), Hong Kong SAR, August 2 – 5, 2007.

174. Wong, P.K., Yu, F., Sun, R. and Ho, C.M., “Unraveling Gene Regulatory Networks Using and Integrated Microfluidic Platform”, IEEE 7th International Conference on Nanotechnology (IEEE-Nano ‘07), Hong Kong SAR, August 2 – 5, 2007

175. Blin, A., Wei, F. and Ho, C.M., “A Facile Immuno-Sensor with Surface Property Control by Conducting Polymer,” IEEE international Conference on Nano/molecular Medicine and Engineering Conference, Macau, August 6 – 9, 2007.

176. Li, N., Wong, P.K., Lin, J., and Ho, C.M., “Transfection of Molecular Beacons in Microchannels under Flow and No-flow Conditions”, MEMS 2008, Tucson, AZ, January 13 – 17, 2008.

177. Lillehoj, P.B., Li, N., Tsutsui, T., and Ho, C.M., “A Compact Microfluidic Continuous Flow Separator for Particle and Cell Sorting”, Proc. of 21st IEEE MEMS 2008, pp. 292-295, Tucson, AZ, January 13 – 17, 2008.

178. Wu, C., Wang, P., Lillehoj, P.B., Sabet, L., and Ho, C.M., “A Microfluidic Device for Single and Small Population Cell Trapping and Lysis of Pseudo-nitzschia”, Proc. of 5th IEEE NEMS 2010, paper #384, Xiamen, China, January 20 – 23, 2010.

179. Lillehoj, P.B. and Ho, C.M., “A Long-term, Stable Hydrophillic Poly(dimethylsiloxane) Coating for Capillary-based Pumping, Proc. of 23rd IEEE MEMS 2010, pp. 1063-1066, Cancun, Mexico, January 23 – 27, 2010.

180. Honda, Y., Ding, X., Mussano, F., Wiberg, A, and Ho, C.M., “Application of Feedback System Control (FSC) to Identify the Optimized Osteogenic Drug Cocktails”, MHS2011 & Micro-Nano Global COE, Nagoya Japan, November 6 – 9, 2011.
181. Haulot, G., Benahmed, A.J., and Ho, C.M., “Optoelectronic Reconfigurable Microchannels”, Proc. of 24th IEEE MEMS 2011, pp. 53-56, 2011.

182. Chen, T.-H., Wong, M., Tintut, Y.L., Demer, L., and Ho, C.M, “Cell Pattern Formation controlled by Microscale interfaces”, IEEE MEMS 2012, Paris, France, 2012.

183. Lillehoj, P.B., Huang, M.-C., and Ho, C.M., “A Handheld, Cell Phone-Based Electrochemical Biodectector”, IEEE-MEMS 2013, Taipei, Taiwan, January 2013.

184. Chen, T.H., Pan, L., Zhu, X., and Ho, C.M., “Tissue Morphology Controlled by Micropatterning and Self-Assembly of Vascular Mesenchymal Cells”, IEEE-NEMS 2013, Suzhou, China, April 2013.